Memory Optimization with MaxMem Utility

Have you ever wondered why it is that, when your first reboot your machine, it seems to run smoother and faster than it does after it's been running for a while? This is due in part to programs using system resources (like memory) and then failing to free it when they exit. The software development is a complicated process, so even well-known companies release products with hidden bugs, related to the memory release failure. The end result of problems like this is that your system runs slower and slower. AnalogX MaxMem has been developed to help user refreshing computer resources without rebooting it.

How your computer uses memory?

In Windows there are basically two types of memory: physical and virtual (page). Now physical memory is pretty easy to understand. It's how much RAM you have installed in your computer. So if your system has 64 Megs of RAM - that really is just 64 Megs of physical memory. The other type, page memory, is actually a file on your hard drive that the computer can save physical memory to periodically. Definitely, virtual memory is not nearly as fast as physical memory. And that's the reason your computer starts to operate more slowly. As you run more programs that don't free up resources properly, they use up more and more physical memory, leaving less and less for other programs to use.

How MaxMemcan help you?

What MaxMem does is forces the system to always have certain amounts of physical memory available, and ensures that it never drops below that amount. Also, when your machine is idle for an extended period of time, you can have MaxMem automatically free up a larger percentage of the system memory. This is great for servers or other systems that stay up for extended periods of time.

How to use MaxMem?

Operation of AnalogX MaxMem is simple. Just select the MaxMem program from the Start Menu and you're done. MaxMem will be happily sitting down on your system tray.

The icon on the tray indicates your physical memory utilization for the last 60 seconds. The top equates to 100%, and the bottom to 0%, of your memory is being used. As the bar graph gets higher, it will change from green to yellow, and then finally to red. If you would like a more detailed idea of how much memory is free, simply hover your mouse pointer over the icon. A box will appear showing you how many Megs of memory are available and what percentage of your total memory that is.

If you right-click on the icon, you can get configuration information for the program. This is where you set the amount of memory you want the program to ensure is available. There are three percentages it uses: minimum, periodic, and aggressive.

* The minimum value is the smallest amount of physical memory the system must have available. If it drops below this value, the program will automatically make sure more physical memory is made available.

* The periodic value is only checked 3 minutes after memory has remained relatively untouched. This helps to ensure that a workable amount of memory will probably be available to any new programs that need it.

* Finally, after 30 minutes of idle memory time, the aggressive mode is triggered. This is primarily designed to flush almost everything out of memory that isn't currently being used. A good total for this is around 70%. But this depends on how much memory you have in your system.

If you left-click on the icon, you'll see it do a quick sweep. MaxMem will attempt to increase the amount of free memory by whatever you have configured as the minimum value. So if you are using the default 5%, and you have 10% of your system memory free, then clicking on the icon should increase this up to 15%. You can choose to free up larger chunks by selecting another free size from the Free category in the right-click menu. Each value will increase the amount of free system memory by the specified percentage. In the configuration menu you can also change the left-click operation to perform any of the cleanups based on which one you most commonly use.

You might occasionally wish to disable MaxMem (such as when you're playing a game). In these instances you don't need to exit the program. You can instead just choose to disable it temporarily.

Author’s website (with downloading link): http://www.analogx.com/contents/download/System/maxmem/Freeware.htm